NOTES
The three series, TPy3-415/480-…-2B, TPy3-500/600-…-2B and TPy3-660/800-…-2B are different only for the maximum power supply voltage on the power section and for a part of the regulation section connected via connector cable. Starting from the 110A size, the converters are forced-ventilated. The two quadrant functioning methods with a recovery braking and the three quadrant functioning methods with a reversible field controller (TPey2…4B) require the use of devices with the “+e” option. On the converter it is possible to put up to four “y” option cards (for “TPy..2B+e” a maximum of three) on the rear side of the regulation card with an internal connection to the converter via a flat cable and a FA… connector.
FEATURES
Field power supply: Internal field rectifier and Internal field loss relay
Internal reference: +10V
Ramp circuit: 0,5...150s
Reaction: Max. 300V tachogenerator, adjustment via resistors
Armature with RxI compensation, Internal connection
Enabling +15...24V :
- regulation (+ramp)
- ramp
- reference
- direct enabling via PLC
Signals (with contact and +24V):
- speed threshold
- Intervention field (0.3...10% nmax, 3...100% nmax)
- Alarm signals
Connection for external indicators of armature current and speed, converter internal tuning
FUNCTIONS
Current adaptive
f.c.e.m. transducer
Possibility for: external current limit, current regulation, regulation and power simultaneous setting, power and regulation separate power supply
Possibility for an internal mounting of the “…y” option cards (max 4, max 1 with +FC)
LED signaling the functioning conditions
Internal switches and adjustments via dip-switches
Coupling possibility via a flat cable with field converter
OPTIONS
Armature with RxI compensation (External connection, by using TVO-1 card)
Internal exciter (Option + FC)
|
.